How to Create Your Own Dog Mask – The Basics

In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques that you can use.

If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the home, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it is actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape out of the cardboard, so you will need to cut around the edge of the mask so you get something which looks like a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.

Then you’ll need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can make certain that nothing will leak once you place the mask on. Be sure the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint after you are done, so you don’t wind up with smudges or smears on your dog.

Then it’s time to paste the mask onto your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and fold it over. Make certain it’s quite strong and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged securely onto the face of your dog. Don’t make the folds too big or else it might look messy. As mask dog soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Be sure that the ears are flat and be certain it is not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask as your pet security, you will have to do some sanding to be sure that it is safe on your dog. You can accomplish this by sanding off any excess paper which might have been removed from your mask.

Leave A Reply